UCS512 SOP16 IC for DMX 5v 12v 24v rgbw led tapes pixel chip Components

This pixel protocol was designed by Lianxinke in China. It uses a non-differential DMX512 protocol to drive pixel chips. The control circuit comes in a SOP16 package, allowing for more flexibility with LED choice, can be used for DC5V/DC12V/DC24V RGBW DMX LED Strip

Support

Note: When configuring your pixel device, select 'DMX512' as your Pixel Type. This is the equivalent protocol that will allow you to use UCS512B pixels.

Technical Specifications

UCS512B Advantages:

• Very High PWM rate 3.6KHZ allows for filming the pixels with around 120fps appromately.
• External output constant current adjustable resistor, current range 3~60mA per channel to choose.
• Presence of white LED allows for be independently controlled to create bolder and more vibrant colors than with RGB alone.
• When write DMX512 address via the DMX512 address writer, no need to connect the address cable.
• Maximum distance to write DMX address code is no relationship with the PI cable distance.
• The UCS512C4 has a PWM reverse polarity frequency reduction output, allowing for external high current driver devices.

UCS512B Shortcomings:

• 8 bits of color resolution, 256 grayscale for each color makes dimming curves less smooth.
• Couldn't wirte DMX512 address automatically.

 UCS512B applications:

• DMX512 RGBW Pixel LED tapes from 5V - 24V that leds denstity from 32 leds - 120 leds. 
• DMX512 LED pixel point lights, wall washer lights.
• Stage lighting systems, video walls.