NEWSTAR LED Co., limited
PixLite E4-S Mk3 Pixel Controller HD107S HD108 RGB RGBW
24 universes of Art-Net or sACN
Four non-powered pixel outputs
Over 60+ pixel protocols supported
microSD card slot for Advatek SHOWTime
Auxiliary port for DMX512 In/Out
Configure using Advatek Assistant 3 or any web browser
Electrical fault protection on all ports
Five-year warranty and global certifications
The PixLite E4-S Mk3 is an economical but powerful pixel LED controller built upon Advatek’s third generation PixLite® Mk3 processor. The PixLite® E4-S Mk3 drives up to six universes of data on each of its four outputs for a total of 24 universes of LED pixel control. This mighty, yet budget-friendly pixel controller is suitable for installations where pixel power is not routed through the pixel controller.
Drive up to six universes of data on each of its four outputs for a total of 24 universes of LED pixel control.
Mighty, yet budget-friendly pixel controller, suitable for installations where pixel power is not routed through the controller.
Specifications
| Ethernet Ports | 1 x 10/100 Mbit/s |
| microSD Card Slot | |
| Auxiliary Port | 1 x RS485 Input/Output |
| Pixel Outputs | 4 x Non-Powered |
| Dimensions | 115 x 86 x 33mm |
| Weight | 0.1kg |
| Enclosure Material | ABS |
| Mounting Options | Wall & Din-Rail Mountable |
| Input Power | 5V - 24V DC |
| Maximum Power Consumption | 2.5W |
| Ambient Operating Temperature | -20°C to +70°C |